• Home
  • Tips
  • How to Install a Fiamma Zip Awning

avatar

Fiamma Zip Awning

Have you ever wanted the perfect combination of an awning and a caravan annexe? The Fiamma Nil Canopy offers a not bad awning with your personal enclosure. Fiamma has come with this amazing applied science which allows the walls to be zipped to the fabric of the canopy with the utilise of special zippers. So before you fifty-fifty know it, the enclosure would be fix in front end of you with minimal attempt being required for it.

The Fiamma Awning (Nix) is ideal for motorhomes, caravans and van conversions. In terms of design, the Aught canopy is based on the Fiamma F45 model which serves as the base of operations structure for the accommodation of the zipped side panels. This is a bully addition to your RV equally the entire enclosure can exist prepare upward within minutes.

For installing the Aught awning correctly and ensuring smooth performance of the entire structure, follow these steps and you should exist able to go things done without any hassle.

  • Open out the canopy by using the required level and extend information technology to its total length. Once done, you demand to bring out the support arms and place them firmly on the ground.
  • If this is your first time, then become through the instructions manual to go an agreement of the things that demand to exist attached to the awning to make information technology a complete enclosure.
  • Prepare the two sockets on either cease of the awning track and tighten them with the screws (provided) till they are firmly in identify. Brand certain you adjust the position so that everything is aligned perfectly.
  • Put the foam columns within the given space in the side panels. This will give some rigidity to one of the ends / edges of the side panels and it would allow them to be placed properly along with the canopy.
  • The poles would have been provided in disassembled parts. Join these parts to class long poles. There are adjusting screws on them so you need to set up the height of the poles appropriately.
  • Once the poles are assembled, insert them in the infinite provided in the side panels. The rods would have a protruding section at one finish. This section needs to exist inserted in the socket provided at the end of the canopy rail (stock-still earlier).
  • The other cease of the pole has a grooved socket type terminate which fits between the side panel and the fabric of the awning.
  • If you take a expert await at the front part of the awning, at that place would exist a slot for sliding the front end panel inside the entire section. So all you demand to do here is to take the front console (the i with the door / windows) and slide it in the slot.
  • Here comes the interesting part. You lot would accept been provided with 2 coiled rings. Take each ring and adhere it to the hole / slot provided at the top part of the side console. This will give you the initial position of the attachment. Just move the zipper upward towards the rail and the side panels would have been zipped in to position.
  • Repeat the same for the front end panels. The mechanism is the same for both the side panels and the front end panel.
  • Now you need to attach the supporting poles at the dorsum stop of the enclosure. In one case this is done, you need to strap the gratuitous terminate of the side console at the back to the pole.
  • This clears off the major piece of work that had to be done while installing a ZIP awning. All that remains to be washed is to use the pegs to pin down the flap / actress fabric at the end of each panel, to the ground.

The window sections in the panels are provided with grooves where you lot can fix defunction and make the infinite fifty-fifty more “homely”. So the next time yous programme a road trip with your family or friends, don’t forget to take forth the Fiamma Zero Awning for a truly spectacular and relaxing holiday.

Contact Xtend Outdoors.